How to boost wifi signal using a beer can

How to boost WiFi signal using a beer can

Are you looking for ways to increase the signal strength of the wireless router without having to invest in a WiFi extender.A piece of Aluminum foil is probably the easiest and cheapest way to boost your WiFi signal. You just need to position the foil behind the antenna of your wireless router and the curved foil will then direct the WiFi signals in your preferred direction thus boosting the overall signal strength.This method has been proven to improve WiFi reception from around 2 bars to about 4 on average, varying between 3 and 5. Give it a go all you've got to waste is a beer can

1. Gather required materials and tools as listed below

2. Clean the beer can,make sure that its washed thoroughly so that there is no smell or anything left by that liquid Beer,Now after washing that Beer Can thoroughly you have to remove that small can opening piece

3. Cut the end off the beer can where there's no opening

4. Now you have to repeat the same step on the other corner but this time you have to leave small space between the cuts so that the can remains attached to the bottom, See image shown below

5.Cut along the middle of the can in a straight line, opposite to the piece of metal attaching the base

6.Now last step is too attach this can to your modem - router antenna, you can change directions of your antenna suiting your will, like in which direction you want it too boost the signal.

7.It's done....

If you like it then don't forget to like our Facebook page